PTFE Teflon Lined For Hydrotermal Autoclave Chamber 25 ml Brand Ningbo Material High quality Teflon PTFE Maximum operating temperature: 240C Safe temperature: 220C Working Pressure: 3MPa or 30 Bar Heating and Cooling Rate: 5C/min Dimensi : Panjang 6,1 cm Diameter 3,4 cm inner PTFE (Teflon Liner) Chamber. Application : can be used in the digestion of lead, copper, cadmium, zinc, calcium, manganese, iron, mercury and other heavy metals

PES Syringe Filter Brand Hawach Scientific Specially designed to withstand autoclaving at 121 °C, 1 bar, 20 minutes/EO/Gamma. Medical grade of PP housing, upper and lower parts are ultrasonically welded into one to avoid contaminant to samples. The syringe filter housing is made of medical grade PP plastic. The non-slip design, high pressure resistance, and there is no leakage of the product. Equivalent to brands syringe filter products. 0.1um to 10um pore sizes to choose from. Quality imported membranes to meet your needs. Available to collocate with various syringes for its universal Luer fitting. Features of PES Syringe Filters PES Syringe Filters Very strong hydrophilicity, narrow pore distribution, and precise pore size. No pollution to samples. fast filtration rate, and good chemical resistance; Clear has a very good effect. Very low protein binding and extractable Standard 1μm pre-filter for optimum performance through particle load analysis Applications of PES Syringe Filters Purify and sterilize aqueous solutions and/or biological samples Protein and enzyme filtration sterilization IC chromatography Filter the alcohol solutions, filter the aqueous solutions, and sterilely filter Cell culture Tissue culture medium sterilization Chemical Compatibility Incompatible with: MEK, Concentrated acids, hexane, THF, halogenated, chloroform, Protein-based samples in aqueous solutions, acetone, DMSO, Ketones, esters, chloromethane, or aromatic hydrocarbons. Hydrophilic PES Syringe Filter Merk Filtstar Manufacturer : Hawach Scientific Filter Media : Hydrophilic PES Diameter : 25mm Housing : Medical PP Pore Size : 0.45Um, Filtration Area : 4.9cm2 Maximum Pressure : 5.2bar Process Volume : 100mL Pre-filter : 1m GF or PP Hold-up Volume : lt; 100UL Inlet : Female Luer Lock Outlet : Male luer slip Qty 100 pcs/pack

Hydrophilic PTFE Syringe Filters The hydrophilic unsupported membrane that ideal for HPLC and mixtures of aqueous and organic solvents. Use with both aqueous and organic solvents, along with their mixtures. Features Hydrophilic syringe filter The lowest level of IC extractable Broad chemical compatibility and flexibility in the lab optimizing background levels in sensitive IC analyses Luer Lock Inlet Tip makes secures connections amp; avoid blow off Standard1um pre-filter (Glass fiber or PP ) for optimal performance with particulate-laden analyses Applications Filtration of aggressive organic or highly basic solutions, transducer protectors. Chemical Compatibility: 1. Compatible with: Aggressive solvents, strong acids, alcohols, bases, aromatics 2. Incompatible with: Perchloric acid Methylene chloride (limited exposure) Dioxane, DMF, formic acid gt; 50% Ion Chromatography (IC) on Ion extractable test of Hydrophilic PTFE Syringe Filter(Filstar series) IC syringe filters are the best choice for ion analysis and consistent results. Its high retention efficiency for fine particles can extend the life of the IC instrument. The syringe filter is verified by IC with a very low ion interference low background value. Using ultrasonic welding technology, no leakage risk. Non sterile Hydrophilic PTFE Syringe Filter Merk : Filstar Manufacturer : Starlab/Hawach sci Filter Media : PTFE Filtration Area : 4.9 cm2 Housing : Medical PP Diameter : 25 mm Pore Size : 0.22 Um Max Prtessure : 5.2 bar Process Volume : 100 ml Wettability : Hydrophilic Operation Temp : 60 C Qty : 100/pack

High Purity Alumina Crucible For Lab Sample Preparation Alumina or aluminum oxide (Al2O3) in its various levels of purity is used more often than any other advanced ceramic material. Tigar Ceramic offers a wide range of material types with different property profiles that can be adjusted via a targeted matrix design. This material has very high hardness, very high stiffness, very good corrosion resistance to chemicals at high temperature, and very high refractoriness or use temperature. The applications for alumina advanced ceramics are heavy-duty forming tools, substrates and resistor cores in the electronics industry, tiles for wear protection and ballistics, thread guides in textile engineering, seal and regulator discs for valves, heat-sinks for lighting systems, protection tubes in thermal processes or catalyst carriers for the chemicals industry. Volume : 100 ml Material : Alumina Ceramic Color : White or light pink or light yellow Density : 3.70-3.90g/cm3 Raw material: 95% or 99.7% alumina ceramic Feature : High Temperature Resistance

High Purity Alumina Crucible For Lab Sample Preparation Alumina or aluminum oxide (Al2O3) in its various levels of purity is used more often than any other advanced ceramic material. Tigar Ceramic offers a wide range of material types with different property profiles that can be adjusted via a targeted matrix design. This material has very high hardness, very high stiffness, very good corrosion resistance to chemicals at high temperature, and very high refractoriness or use temperature. The applications for alumina advanced ceramics are heavy-duty forming tools, substrates and resistor cores in the electronics industry, tiles for wear protection and ballistics, thread guides in textile engineering, seal and regulator discs for valves, heat-sinks for lighting systems, protection tubes in thermal processes or catalyst carriers for the chemicals industry. Volume : 20 ml Material : Alumina Ceramic Color : White or light pink or light yellow Density : 3.70-3.90g/cm3 Raw material: 95% or 99.7% alumina ceramic Feature : High Temperature Resistance

Certified TOC Vial Clear Brand : ALWSCI Cat. No : C0000342 Material : Glass 40mL 27.5x95mm Clear Glass EPA/TOC Vial 24-400 White Open Top PP Screw Cap with 22mm Natural PTFE/White Silicone 3.0mm thick Septa (EPA Quality) and Dust Cover. 72pcs/pk. Product Name EPA VOA TOC Vials Material USP Type I, Borosilicate glass Volume 40ml Vial Size 27.5x95mm Vial Choices Clear and Amber available Cap Choices Black and white pp cap available Septa Choices 3mm thickness. PTFE/Silicone septa. Thread ND24mm screw thread Matched Brand C amp;G Container, EP Scientific/ Thermo, SUEZ Sievers,Shimadzu, etc Package 72pcs/pp box, 4boxes/ctn

Analytical Balance 220g x 0.0001g Brand Name Want Balance Product name High precision balance Model FA2204E Capacity(g) 220g Resolution(g) 0.0001g Unit: mg, g, ct, oz, %, pcs Min weighing(g) 0.0004g Stable Time ≤3s Display LCD(white back light with black font) Pan size Φ80mm(standard) Φ90mm(optional) Operation temp 5-35ºC Repeat ability ±0.0002g Liner ±0.0003g Dimension 300X200X285mm Draft shield size 180x175x200mm LCD Size 96x24mm Cal.weight External(Internal) Calibration Option RS232C(standard), RS485/ USB/Printer(optional) Packing size 425x320x415mm

Electronic Balance Merk Want Model WT50002GM Kapasitas 5000gr x 0.01gr Product details: 1. Aluminium base, thickness of 3.8mm. Sensor part individually sealed shield installation. 2. Pan: 200*200mm, stainless steel 304. 3. Display: Bigger LCD (white back-light) (L×W) 4.5 #34;×1.6 #34; (115×40 mm) 4. Interface: RS232 5. Power: AC/DC (Rechargeable Battery) 6. Units: g, kg, oz, ct, lb, GN 7. More functions: Counting, Percentage, Full Range Tare, Over-Load Protection, Zero Tracking, Automatic Turn-Off, Under Weighing, Low Power Indicator 8. Attachments: english manual, adapter 9. Speed: 2 s 10. Value stable time: 3 s

High Quality Hot Plate Stirrer
Model SH-2
Brand : Faithful

Uses: It is used when liquid heating is needed in industry, agriculture, health and medicine, scientific research and college labs etc.
Characteristics:
1. Die-casting and stretching roof cover; Fabrication processed exterior to prevent leaking.
2. Heating and stirring can proceed simultaneously.
3. Enclosed heating plate with characteristics of flame protection, fast warm-up and durability.
4. Heating power and stirring speed is stepless adjusted.

Spesifikasi
Voltage : 200-240
Volt Power : 180 watt
Speed : 100-2000 rpm
Max Volume : 2000 ml
Plate size : 12x12 cm
Max temperature : 380 C
Dimensions : 200x120x90

Model No.PC-102 Made inTaiwan Pipe clamp temperature probe is ideal for measuring temperature surface of pipe in heating, ventilating, air conditioning, or engine...etc. SPECIFICATION Product: Type K Pipe Clamp Probe Model No.: PC-102 Measurement Range: Max. 120 °C or 400 °C Dimension: 3~48 mm clamp jaw opening Thermocouple Type Standard type K thermocouple Element Single Temperature Range -50 °C ~ 400°C (-58 °F ~ 752 °F) Clamp Jaw Opening 3 to 48 mm Cable Material amp; Length : PVC straight cable in blue: 1M Weight 125 g FEATURE 13th Moscow International Salon of Inventions and Innovation Technologies #34;Archimedes #34; - bronze medal Pipe Clamp Temperature Probe Easy contact sensor amp; completely hands free Wide measurement range Compatible with Type K thermometers High temperature measurement up to 400 °C

The TimeStick one handed cooking timer and kitchen timer. Catalog 806-18 Brand ETI bar-graph indicates remaining time handy lanyard to hang around the neck 12/24 hour format clock one-handed operation The TimeStick is a handy-sized, portable kitchen timer and cooking timer with a water resistant numeric keypad. Simply hang it around your neck, slip it in your pocket or mount it to a magnetic surface. The count-down bar graph gives you a quick indicator of remaining time. When the countdown alarm sounds, the count-up timer starts so you will see how much time has elapsed since setting the alarm. The TimeStick timer also features a 12 or 24 hour format and a keypad lock to prevent accidental key entry. The TimeStick is powered by a CR2032 battery and is available in three colours.

Infrared Thermometer Merk Amittari Model AT-150D Product Description The Infrared Thermometer, compact structure, good anti-jamming and easy-to-use. After take aim and press key, surface temperature of measured object will be read in a second. For high temperatures, toxic or hard-to-reach objects, use this thermometer can safely to measure. Product Feature * With ℃/℉ temperature unit convertible. * Adjustable emissivity from 0.10 to 1.00.(The default is 0.95) * Field of View: 12:1.(D:S= 12:1,example: at a distance of 12 inches the reading spot size is 1 inches) * Multifunctional measurement: maximum value, minimum value,temperature difference,average value,contract value. * Allows non-contact precisions measurement,movable object ,charged surface and hard-to-reach objects measurement. Product Parameters Model AT-150D Temperature Range 50°C~1100°C Measurement accuracy ±2% or 2 Emissivity 0.10~1.00 adjustable (The default is 0.95) Resolution 0.1°C / 1°F Repeatability ±1% or 1 °C Response Time 500m Sec,95% Response Response Wavelength 8~14um Sampling Speed 2.5/s Distance to spot size 20:1 Operating Temperature 0~40°C Relative Humidity Operating:10%~90%RH Store: ＜80%RH Power Supply 9V Alkaline Batteries Size 105x50x200mm Weight 270g Product Accessories Standard Accessories Main Unit Carrying Case Operation Manual

1). Laboratory Glass Filter Solvent Vacuum Filtration Set Material : Boro3.3 Brand Joan Lab Apply to chemical analysis, sanitary inspection, environment monitoring, biological, industrial, scientific research and so on for filtering bacteria and fine particles. Consist of 1. Funnel 300 ml. 2. Membrane holder 47 mm 3. Holder clamp 4. Funnel cap 5. Flash 1000 ml Advantages 1. Appropriate for most of aqueous Solvents and organic solvents 2. Acid-resistant, corrosion-resistant 3. Autoclavable and can be sterilized under 180℃ 4. Max working temperature:200℃ 20). Handheld Vacuum Pump with Gauge Vacuum Pump, Hand Operated, with Gauge The hand operated vacuum pump is made of a durable polychloroethylene plastic. It is designed for pulling a partial vacuum, of up to 500 mm Hg, on small closed systems of about 600 ml or less. Each pump of the handle displaces 15ml in volume. A vacuum gauge on the pump reads in both Pascals (0.1-0 MPa) and mm of Hg (760-0 mm Hg) to indicate actual vacuum. A quick-release valve provides vacuum release without disconnecting the pump. Package 1 x Hand-held Vacuum Pump with gauge 1 x Vacuum Hose

Mini Vortex Mixer adjustable Speed ​​500-3500 Rpm Essential details Mini Vortex Mixer Brand Name: LICHEN Model Number: LCH-MX-M2 Place of Origin: Zhejiang, China Item: vortex mixer Voltage: DC12V 1A Power: 5 watt Circumferential : 4.5 mm Speed range: 3500 rpm/500-3500 rpm Operation Mode: BrushlessDC motor Model: LCH-MX

Sample Concentration — KD200 KD200 sample concertration is mainly used for the concentration and preparation of large-scale samples, such as sample preparation in drug screening, hormone analysis, liquid phase, gas phase and mass spectrometry analysis. Working principle: By blowing nitrogen gas into the surface of the heated sample, the solvent in the sample is quickly evaporated and separated, so as to achieve the purpose of anaerobic concentration of the sample and keep the sample more pure. Using a sample concertration instead of a common rotary evaporator for concentration can condense dozens of samples at the same time, greatly shortening the sample preparation time, and has the characteristics of time saving, easy operation and speed. Model KD200 Temperature control range RT.+5 ℃～150 ℃ Temperature control discrepancy ≤1 °C (RT.+5 °C~100 °C) ≤1.5 °C (100 °C~150 °C) Heating time (from 40 °C to 150 °C) ≤30 min Timer range 1 min-99 h59 min Maximum input power 400 W Temp. control discrepancy 0.1 ℃ Needle length 150 mm Capacity 12 pcs Dimension (mm) 280×240×500 mm

New Model Mini Handheld Homogenizer Brand : MIULAB Model : MT-13K-L Descriptions : The mini homogenizer MT-13K-L is hand-held designed. It is smart and light, easy to operate. With DC motor to drive the grinding pestle, configure 1.5ml centrifugal tube, efficiently grind trace tissue. The grinding pestle is light and reusable, convenient to be dismantled. Specifications : Speed Range 13000rpm Working Noise 50dB Battery Non-loaded Working Time 2 hours Battery Charging time 2 hours Battery AA battery x 2 Applications : 1. Suitable for grinding various plant tissue sample such as root, stem, leaf, flower, fruit, seed, etc. 2. Suitable for grinding various animal tissue sample such as cerebrum, heart, lung, stomach, liver,thymus, kidney,intestine, lymphonodus, muscle, skeleton, etc. 3. Suitable for homogenate. Includes : 10 pcs white plastic pestle head 2 pcs spare rubber seal for pestle holder

Residual Chlorine Meter Brand Lohand Instrument Model LH-C10F This instrument adopts the DPD photometric method, which is specially used to determine the concentration of residual chlorine in water samples. A large number of experiments have proved that this method is simple and quick to operate and has high sensitivity. The instrument is small in size, light in weight, easy to carry, suitable for field and field use. Feature 1.Pre-stored standard curve 2.Economic and environmental protection 3.Easy to carry 4.IP65 protection level 5.Good optical stability 6.Intuitive and simple operation Specification Measuring range : 0.10-10.00mg/L Light : LED Wavelength : 520nm Repeatability : lt;1.0mg/L,error≤±0.05mg/L ≥1.0mg/L，error≤±5% Principle : DPD method Battery Life : More than 24 hours (no shutdown) Dimension : 128*70*48mm Weight : 188g(with battery) Suitable application Municipal water,Medical water,Public health,Environmental monitoring.

Liquid Vacuum Aspiration System Brand name Joanlab Model VP - 6Pro Product Feature 1.Vacuum power can be set to different levels to achieve 1.6L/min to 6L/min aspiration speed. 2.Sensitive level sensor to prevent liquid overflow during the operation. 3. High temperature disinfection waste collection bottle(receiving bottle),tubing and handle. Lid,tubing and handle are easy for disassembling,cleaning and disinfecting. 4. Wide range of adapters to fit tube,micro plate and disc plate for various tasks. 5. Interchangeable hand operator-tip adapters make it suitable for various tasks from single channel to 8-channel based on the applications in tube,micro plate,disc plate etc. Model VP - 6Pro Type Negative pressure suction Control type Digital display knob Pumping rate 6L / Min Fluid absorption rate 1.6L / Min Speed grade 9 Ultimate vacuum 0.06Mpa Diameter of collection bottle 93mm Power 10W Weight 780g

Specification : High Speed Homogenizer for Laboratory Model : FSH-2A Brand : Lawson Motor Speed : 22000 Rev/Min Homogenizer Knife 1 : 8000-180000 Rev/Min Homogenizer Knife 2 : 8000-200000 Rev/Min Power : 200 W Dimession : 300 x 250 x 400 mm3 Total Weight : 2200 Rev/Min Voltage : 8kg Ambient Temperature : -10 -45°C Supply voltage 220/110V 60Hz ±5% Instrument Accessories : FSH-2A Homogenizer 5ml, 10ml, 15ml Homogenizer Cup Stainless Steel Homogenizer Knife x2 Power Cable Instructions : 1. Cut the material to be crushedinti 2mm3 particles and put them into a homogenizing vessel and then add appropriate liquid or water. 2. Put the crushing knife into the vessel, put the speed control knob at the slowest position and turn on the power, the speed gradually increases from slow to fast, high speed start is strictly prohibited 3. The medium speed work prolongs the service life of the machine, snd the high speed work time should be less than 5 minutes 4. The F4 anti wear bushing in the homogeneous knife needs to be replaced after wear Precautions : First : After assembly, do not install the cutter head first, and try whether the controller light is on. if the motor does not turn, the second step can be carried out normally Second : Look at the bottom of the cutter head, turn the powe cutter head with a pen or other small appliance, and try to see if it can be rotated. if it can be rotated, install the cutter head normally and cannot rotate. it may be stuck. contact us by phone, or send news, we call to guide you Third : After Installing the cutter head, pull it down by hand, shake it left and right, make sure the cutter head is installed and then work. If the cutter head is not installed in place, it will be thrown off after the machine is turned on, there are dangerous factors Fourth : start the work, the cutter head cannot be idling, before use, fix the machine put a glass of water. Start cleaning the lower cutter head Fifth : After use, the cutter head should be clean

This is a Mini Pump which can provide the vacuum and the pressure. It can be used in the laboratory and the electric factory and any occasion. It could be used for vacuum filtration, vacuum distillation and pressure distillation. It also could be used to do the vacuum for the clothes package or other use which need the vacuum or the pressure. It can do the charge, when you remove the power adapter, it can still work two hours. So, it can be used outside of the house. We provide the OEM service for this Pump, if you could place the bulk order, we can print your Logo on the pump and the package.


Specification :
Input: AC 110V-240V
Frequency: 50/60HZ
Power: 12W
NO-loading Flow: ≥5L/Min
Max Vacuum: ≥ 58 Kpa
Max Pressure: ≥100 KPa
Noise: ≤ 60 dB
Package includes:
1 Pump 1pcs
2 Silicon tube inner diameter 4mm,100mm length,1pcs
3 Silicon tube inner diameter 6mm,500mm Length 1pcs
4 Silicon tube inner diameter 8mm,100mm Length 1pcs
5 Silicon tube inner diameter 10mm,100mm Length 1pcs
6 Silicon tube inner diameter 12mm,100mm Length 1pcs
7 Plastic Connector adapter 5.6mm to 4.8mm,1pcs
8 Plastic Connector adapter 5.6mm to 7.9mm,1pcs
9 Plastic Connector adapter 5.6mm to 9.5mm,1pcs
10 Plastic Connector adapter 5.6mm to 11.1mm,1pcs
11 Power adapter 110V~240V two feet plug,1pcs
12 Instructions,1pcs
USAGE
Open and Adjustment
Plug the power adapter into the socket in the back of the pump. Open the power to -,adjust the knob to the clockwise in the front panel, you can adjust the speed of the pump.
Turn off the knob to anticlockwise, it will power off. Then take off the power in the back panel to O, it will cut off the power of the whole machine.
Charge
Plug the power adapter into the socket, it will be in the charge, you should not open the power and the knob. When it is in charge, the red light will be power on. When the green light is on, the machine is full power, you had better do the charge no more 2 hours.
SAFETY NOTIFICATIONS
It can be do the vacuum and pressure, but it prohibits use these two functions at the same time.
Charging time should not exceed 2 hours.
Please use the power adapter from us.
Prohibit use this pump to do the liquid.
When you use it to do absorb the corrosion gas, please use the buffer bottle to leach the corrosion gas to protect the pump.
When the pump is hot big noise smoking and other abnormal state, please take off it right now.
When it needs repairing, please contact the seller to deal with it